Memcapacitor model and its application in a chaotic oscillator

A memcapacitor is a new type of memory capacitor. Before the advent of practical memcapacitor, the prospective studies on its models and potential applications are of importance. For this purpose, we establish a mathematical memcapacitor model and a corresponding circuit model. As a potential application, based on the model, a memcapacitor oscillator is designed, with its basic dynamic characteristics analyzed theoretically and experimentally. Some circuit variables such as charge, flux, and integral of charge, which are difficult to measure, are observed and measured via simulations and experiments. Analysis results show that besides the typical period-doubling bifurcations and period-3 windows, sustained chaos with constant Lyapunov exponents occurs. Moreover, this oscillator also exhibits abrupt chaos and some novel bifurcations.In addition, based on the digital signal processing(DSP) technology, a scheme of digitally realizing this memcapacitor oscillator is provided. Then the statistical properties of the chaotic sequences generated from the oscillator are tested by using the test suit of the National Institute of Standards and Technology(NIST). The tested randomness definitely reaches the standards of NIST, and is better than that of the well-known Lorenz system.     

Construction and cosmic-ray test of the new inner drift chamber for BESIII

A new inner drift chamber has been built which can replace the aged part of the BESIII drift chamber when needed. The design of the new inner drift chamber can minimize the ineffective area in the very forward and backward region and hence reduce the background event rate. With this design, the new inner drift chamber is expected to have a longer lifetime and improved performance due to the lower occupancy. The endplates and the cylinder were machined with high precision. Wire stringing was performed after the mechanical structure was assembled, and good quality of wire stringing was ensured by measurement of the tension and leakage current of the wires. After completion of the physical construction of the new chamber, a cosmic-ray test was carried out to test its performance. The results of the cosmic-ray test show that the new inner chamber achieves a spatial resolution of127 μm and a d E/dx resolution of 6.4%, which satisfies the design specifications.     

Effect of Bi‐content on hardness and micro‐creep behavior of Sn‐3.5Ag rapidly solidified alloy

In the present paper, the influence of 1, 3, 5 and 10 % Bi (weight %) as ternary additions on structure, melting and mechanical properties of rapidly solidified Sn‐3.5Ag alloy has been investigated. The effect of Bi was discussed based on the experimental results. The experimental results showed that the alloys of Sn‐3.5Ag, Sn‐3.5Ag‐1Bi and Sn‐3.5Ag‐3Bi are composed of two phases; Ag₃Sn IMC embedded in Sn matrix phase, which indicated that the solubility of Bi phase in Sn‐matrix was extended to 3 % as a result of rapid solidification. Bi precipitation in Sn matrix was only observed in Sn‐3.5Ag‐5Bi and Sn‐3.5Ag‐10Bi alloys. Also, addition of Bi decreased continuously the melting point of the eutectic Sn‐3.5Ag alloy to 202.6 °C at 10 % Bi. Vickers hardness of Sn‐3.5Ag rapidly solidified alloy increased with increasing Bi content up to 3 % due to supersaturated solid solution strengthening hardening mechanism of Bi phase in Sn matrix, while the alloys contain 5 and 10 % Bi exhibited lower values of Vickers hardness. The lower values can be attributed to the precipitation of Bi as a secondary phase which may form strained regions due to the embrittlement of Bi atom. In addition, the effect of Bi addition on the micro‐creep behavior of Sn‐3.5Ag alloy as well as the creep rate have been described and has been calculated at room temperature. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

6S现场管理方法在计量检测实验室中的应用

6S现场管理的方法已经在多个领域得以运用并取得较好的效果。结合计量检测实验室的特点,从整理、整顿、清扫、清洁、素养、安全6各方面讨论了6S现场管理在计量检测实验室中的应用。该管理模式可以提高工作效率,降低物品遗失率,减少寻找物品的时间等,提高计量检测质量。     

塑料泊松比标准与试验技术探讨

分析比较了ISO 527:2012和ASTM D638-10中关于塑料泊松比试验方法的异同,重点讨论了两个标准在测试技术上的不同要求,探讨了试验机性能对试验结果的影响,并提出了对试验机测控系统设计的技术要求。     

Test particle simulations of resonant interactions between energetic electrons and discrete,multi-frequency artificial whistler waves in the plasmasphere

Modulated high frequency(HF) heating of the ionosphere provides a feasible means of artificially generating extremely low frequency(ELF)/very low frequency(VLF) whistler waves, which can leak into the inner magnetosphere and contribute to resonant interactions with high energy electrons. Combining the ray tracing method and test particle simulations, we evaluate the effects of energetic electron resonant scattering driven by the discrete, multi-frequency artificially generated ELF/VLF waves. The simulation results indicate a stochastic behavior of electrons and a linear profile of pitch angle and kinetic energy variations averaged over all test electrons. These features are similar to those associated with single-frequency waves. The computed local diffusion coefficients show that, although the momentum diffusion of relativistic electrons due to artificial ELF/VLF whistlers with a nominal amplitude of ～ 1 pT is minor, the pitch angle scattering can be notably efficient at low pitch angles near the loss cone, which supports the feasibility of artificial triggering of multi-frequency ELF/VLF whistler waves for the removal of high energy electrons from the magnetosphere. We also investigate the dependences of diffusion coefficients on the frequency interval(△f) of the discrete, multi-frequency waves.We find that there is a threshold value of △f for which the net diffusion coefficient of multi-frequency whistlers is inversely proportional to △f(proportional to the frequency components Nw) when △f is below the threshold value but it remains unchanged with increasing △f when △f is larger than the threshold value. This is explained as being due to the fact that the resonant scattering effect of broadband waves is the sum of the effects of each frequency in the ‘effective frequency band’. Our results suggest that the modulation frequency of HF heating of the ionosphere can be appropriately selected with reasonable frequency intervals so that better performance of controlled precipitation of high energy electrons in the plasmasphere by artificial ELF/VLF whistler waves can be achieved.     

A vertical test system for China-ADS project injector II superconducting cavities

To test superconducting cavities, a vertical test system has been designed and set up at the Institute of Modern Physics （IMP）. The system design is based on VCO-PLL hardware and the NI Labview software. The test of the HWR010#2 superconducting cavity shows that the function of this test system is satisfactory for testing the low frequency cavity.     

Multiscale approach to micro/macro fatigue crack growth in 2024-T3 aluminum panel

When two contacting solid surfaces are tightly closed and invisible to the naked eye,the discontinuity is said to be microscopic regardless of whether its length is short or long.By this definition,it is not sufficient to distinguish the difference between a micro-and macro-crack by using the length parameter.Microcracks in high strength metal alloys have been known to be several centimeters or longer.Considered in this work is a dual scale fatigue crack growth model where the main crack can be micro or macro but there prevails an inherent microscopic tip region that is damaged depending on the irregularities of the microstructure.This region is referred to as the"micro-tip"and can be simulated by a sharp wedge with different angles in addition to mixed boundary conditions.The combination is sufficient to model microscopic entities in the form of voids,inclusions,precipitations,interfaces,in addition to subgrain imperfections,or cluster of dislocations.This is accomplished by using the method of"singularity representation"such that closed form asymptotic solutions can be obtained for the development of fatigue crack growth rate relations with three parameters.They include:(1)the crack surface tightness*represented by o/=0.3-0.5 for short cracks in region I,and 0.1-0.2 for long cracks in region II,(2)the micro/macro material properties reflected by the shear modulus ratio*(=micro/macro varying between 2 and 5)and(3)the most sensitive parameter d*being the micro-tip characteristic length d*(=d/do)whose magnitude decreases in the direction of region I II.The existing fatigue crack growth data for 2024-T3 and 7075-T6 aluminum sheets are used to reinterpret the two-parameter da/dN=C(K)nrelation where K has now been re-derived for a microcrack with surfaces tightly in contact.The contact force will depend on the mean stress m or mean stress ratio R as the primary parameter and on the stress amplitude a as the secondary parameter.     

Thick junction broadband organic photodiodes

Inorganic semiconductor‐based broadband photodetectors are ubiquitous in imaging technologies such as digital cameras and photometers. Herein a broadband organic photodiode (OPD) that has performance metrics comparable or superior to inorganic photodiodes over the same spectral range is reported. The photodiode with an active layer comprised of a poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)]:[6,6]‐phenyl‐C₇₁‐butyric acid methyl ester bulk heterojunction blend had a dark current < 1 nA/cm², specific detectivity of ∼10¹³ Jones, reverse bias −3 dB frequency response of 100 kHz to 1 MHz, and state‐of‐the‐art Linear Dynamic Range for organic photodiodes of nine orders of magnitude (180 dB). The key to these performance metrics was the use of a thick junction (700 nm), which flattened the spectral response, reduced the dark current and decreased performance variations. The strategy also provides a route to large area defect free “monolithic” structures for low noise integrated photo‐sensing, position determination, or contact, non‐focal imaging.     

高精度瑞奇-康芒检测法研究及测试距离精度影响分析

为实现高精度瑞奇-康芒法检测,利用检测系统光瞳面与被测平面镜二者间的坐标转换关系,结合最小二乘法直接对测得的系统波像差进行恢复,通过两角度检测分离由光路调整引入的离焦误差,得到更为精准的平面镜面形。分析光路中测试距离对坐标转换关系以及瑞奇角求解精度的影响,根据仿真分析结果确定实验方案。实验中采用两角度检测,对测试波前进行恢复并分离系统调整误差后,最终得到被检平面镜面形,结果峰谷(PV)值为0.182λ、均方根(RMS)值为0.0101λ,对比干涉仪直接检测结果 PV值为0.229λ、RMS值为0.013λ,PV检测精度优于λ/20,RMS检测精度优于λ/100,实验结果证明了此种面形恢复方法的有效性以及测试距离精度分析理论的正确性,从而实现了瑞奇-康芒法高精度检测。